Black Door Handle Covers For 3rd Gen Tundra

3rd Gen Tundra Blacked Out Door Handle Covers

Budget-Friendly Way To Remove Exterior Chrome Accents

The Tundra, like many vehicles, still comes with too many chrome accents for my liking. Chrome-delete products that initially launched alongside the Tundra were quite expensive, selling for a mind-boggling $2,600. Although this is an extreme example, most products you find online are still over $100. I’ve also had vinyl wrap companies quote me $400+.

A few lucky owners received color-matched accents from the factory. However, many of us ended up with the standard chrome trim.

Fortunately, I have found a solution to my distracting door handles. These blacked-out covers from Amazon were exactly what I was looking for.

Find It Online

  • Black Door Handle Covers For 2022+ Tundra: Check Price

Overview

3rd Gen Tundra Lunar Rock With Black Door Handle Covers

These covers come in a variety of options, including matte black (shown in this article), piano black, or chrome. They are very easy to install and feature a smooth finish that’s abrasion-resistant, offering protection.

Unfortunately, they do not come in paint-match options. If that’s something you’re interested in, I painted my own rear bumper and front grill trim with the TouchUpDirect aerosol rattle-can kit. Rather than using these, you could try this method for a paint-matched look.

These have taken quite the abuse in the last couple of months. I have driven through hot deserts at high speeds, tight trails filled with brush, and wet alpine mountains. Through it all, they show no signs of falling off.

Installation

3rd Gen Tundra Door Handle Covers

The installation process is pretty straightforward. You will want to install this product in a garage or at the very least, out of direct sunlight. Ideally, the temperature for installing is between 50-80 degrees Fahrenheit (this range is not mandatory but will yield better results). The door handles do not need to be removed.

Before you begin, clean the surface of using alcohol wipes or isopropyl alcohol with 70% or higher concentration to ensure all debris, dirt, oil, wax, and grease are removed. Otherwise, the adhesive won’t adhere properly. Use the microfiber towel to remove any excess alcohol and dry the application area.

Tools Required

  • Tweezers
  • Alcohol Wipes/Isopropyl Alcohol
  • Microfiber Towel

Step 1. Remove Adhesive Backing

Installing 3rd Gen Tundra Door Handle Covers

By far the most difficult part is removing the stubborn red strips from the double-sided adhesive tape. Having a pair of tweezers will save you time and make peeling them off much easier.

Step 2. Install Covers

3rd Gen Tundra Black Protective Door Handle Covers

Only one of them will have a keyhole for the driver’s side, the rest can be put on wherever.

Align and apply. When applying, push with a little force to ensure a snug fit and proper coverage. Hold in place for 20-30 seconds to ensure the adhesive has enough time to bond.

Initial Impressions

Black Door Handles For 3rd Gen Tundra

As mentioned above, these have stood up to the abuse I put them through. They can take light abrasions without any cosmetic defect but will scratch on tree branches and brush going through tight trails (along with my clear coat, sadly). The adhesive has stayed strong!

The reason I went with matte black is because I wanted to match the emblems on the side of the truck which are also in matte black.

It’s worth noting that there will be small gaps, so it is not snug up against the door itself. It also does not cover the inside. They’re designed this way for ease of installation and so that you’re not pulling them loose every time you open your door.

Black Door Handle Covers Tundra Complaints

I have only two complaints about this product which are relatively minor.

First, they are slightly bulky which makes them feel like a big plastic piece instead of looking and feeling like OEM. Second, I can still see a little bit of chrome around the keyhole.

Final Thoughts

Budget-Friendly Black Door Handle Covers

Since installing these a couple of months ago, I am still very happy with how they have turned out. They have effectively helped me chrome-delete my truck and improved the aesthetics for less than $20.

If they were to lose their adhesiveness or have the color fade from the sun in the next year or two, I would not hesitate to buy them again. For how inexpensive they are and their ease of installation, they’re worth it in my opinion.

Subscribe
Notify of
guest

1 Comment
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
Dan
Dan
8 days ago

Definitely an economical way to chrome delete. You have to wonder how well they will come off when it comes time to replace them.

1
0
Questions or Comments?x
()
x