
A Recently Updated & Trusted Lift Kit At An Affordable Price Point
I’ve always felt that the stock size tires on Gen 2 Tundras look small for the size of the wheel wells they sit in and the overall dimensions of the truck itself. Even with a slightly larger than stock 33″ all terrain on my 2021 Nightshade Double Cab, It still looked small to me. Plus I do some off-road driving on occasion and felt I could use a little more ground clearance. The logical progression for me was to step up to a 35 inch tire, which would require at least a two inch lift to clear without rubbing, along with some trimming.
After doing some research and looking into options, I decided that the newly updated Nitro Plus kit was my best option. OME has been owned by legendary Australian off road company ARB since 1976, and is rooted in off-road racing and exploration in the rugged outback. OME prioritizes a combination of comfort and capability in their suspension systems, rather than sacrificing comfort for performance like some other brands, and their reputation for making a high quality, smooth riding product helped push me in their direction. Also, starting at about $1100 (at time of posting, without UCAs or leaf packs), it’s an affordable option as well, and comes with a 3-year warranty.
Shoutout to Mudify for getting me this kit quickly and at the lowest price I could find!
Find It Online
- ARB OME Nitro Plus (2007-2021) Tundra: Check Price
- Greaseable Shackle Kit: Check Price
Kit Overview

OME’s updated Nitrocharger shocks promise precise damping control and durability, and ultimate stability and responsiveness on challenging terrain, without compromising, and actually improving on-road comfort. Because on-road comfort is still important to me considering I do a lot of highway driving in my truck, I chose to go with the standard weight 0-400lb rear leafs, and the standard weight 0-50lb front coils. This should work fine for me because I don’t typically load a lot of weight into my bed, or tow a heavy trailer, nor do I currently have any heavy body armor or accessories.
However, If you’re running a slide in, or pop up like the Go Fast Camper, you typically load a lot of gear and equipment into your bed, or if you have heavy body armor like steel bumpers, sliders, racks etc. it could be worth considering the heavier weight spring options for both front coils and rear leafs.
If you want to learn more about this new lineup, read Garrett’s post on the latest updates to the Nitrocharger lineup.

Parts List: What’s Included
- Front Nitrocharger Plus Strut (2)
- Rear Nitrocharger Plus Shock (2)
- Front Coil Springs (2)
- Leaf Springs (2)
- U-Bolts (4)
- Fitting Kit (1)
Bonus: Greaseable Shackles & Bushings

In addition to the items included in the kit, I also added on a set of OME Greasable Leaf Spring Shackles, and the coinciding OME Leaf Spring Bushing Kit. These accessories improve upon the original design of the OME Dakar leaf springs by eliminating out of angle ‘shackle pin to side plate’ problems commonly associated with press fit assemblies, and improving low and high-speed control for increased comfort and control over all road surfaces.
Each pin in the shackle kit has two grease outlet holes to guarantee maximum grease coverage between the shackle pin and the spring bush – increasing bushing life and improving ride quality. Heat treated pins ensure long pin life under heavy loads and off road conditions and the side plates are zinc plated for protection against corrosion. Having shackles with oversized bushings that are easy to grease will also eliminate leaf spring squeak as long as they are maintained with grease periodically.
Install Prep – Choosing The Right Shop

If you’re not going to work on your vehicle yourself, you want to make sure that you choose the right shop for the job. In New England there’s a limited supply of reputable shops with real deal off-road focused experience, and out of those shops, Offroad Elements in Abington, Massachusetts is very likely the best of the best. Eric, his wife Gillian and their team of experienced techs are hands down the best 4×4 experts in the Northeast, and if you look at their website, Facebook or Instagram page it will be immediately apparent why.
Their fifteen years of experience building off-road vehicles is what makes them one of the most exceptional fab and install shops on the east coast, plus, they do a lot of the technical work on their vehicles that other shops will farm out to a third party, like re-gearing, something they specialize in. In addition to building custom 4x4s, Eric and Gillian own and operate a sibling business to Offroad Elements called Advanced Driveline, which focuses on building and custom axles designed specifically for off road use and abuse.

Not only are they supremely good at what they do, but they’re good people. Eric, Gillian and their team were welcoming and friendly, even while I bumbled around their shop and sales floor with my camera all day, asking redundant questions and getting in the way. They gave great advice, and helped me avoid any future noise or vibration in my differential, often common with lifted Toyotas, by installing a Needle Bearing Eliminator on my driver’s side, a neat mod I’ll be going into detail about soon in a dedicated post.
Step 1. Remove Original Equipment

The first step to installing the OME Nitro Plus kit is to get the truck up on the lift and pull off the wheels. We started on the front end by disconnecting the lower control arms from the knuckles, front shocks, and sway bar mounts.

Then we remove the OE coilovers from the top mounts. Scottie used a nifty Mini Ductor (induction heater) to apply heat safely around stubborn nuts to make them easy to slip off.

Separate the tie rods from the steering knuckles, and move all loose parts aside. Secure the knuckles out of the way for added ease when installing the new coilovers.
Step 2. Assemble Front Coilovers

If you can’t have your coilovers delivered pre-assembled (which I recommend), this is a step I recommend you enlist a professional to help you with, or at least utilize professional equipment if it’s available to you. Coilover assembly is dangerous, and accidents in the process can cause serious injury or even death. There’s a lot of pressure behind those springs so don’t fool around here, if you’re not comfortable doing it on your own, don’t hesitate to seek professional help.

Start by assembling the shock components according to the instructions provided in the packaging. Then slip the coil spring over the shock and secure it with the top hat.
Step 3. Install Front Coilovers

Slide the new coilovers into place and loosely secure them to the upper mounts. Be sure to remember to tighten them down to spec once the rest of the front suspension is bolted back into place.

Reattach the bottom of the shocks to the shock mounts in the lower control arms.

Using the help of a friend, or an ingenious ratchet strap, pry bar and stand combo like Scottie here, pry the upper control arm and knuckle assembly down while using the stand to secure the lower control arm, bolt the LCA back to the knuckle, and reconnect the tie rod.

You can leave the sway bar disconnected until the truck is back on the ground, which will make it easier to slip the bolt through and reattach it.

At this point your front end is almost all set.
Step 4. Leaf Bushings & Shackle Kit

Now it’s time to get started on the rear. Remove the OE bushings from the new OME leaf springs.

Then press in the new bushings and apply a generous amount of grease.

Assemble the new greaseable shackles carefully following the instructions provided in the kit. Putting these things together properly ensures they perform properly, eliminating squeaks and better handling flex and bumps.
Step 5. Install New Leafs

Start by removing the old leaf springs. You can leave the OE shocks attached for this part of the install. You’ll be putting new, longer U-bolts over the new leafs, but reusing the bracket and bump stops, so be sure to save those.

Remove the old shackles as well.

Lift the new leaf into place, they’re heavy so ask a friend for help, or enlist a very strong man like Scottie to handle it solo while you shoot photos.

Bolt in the leaf to the front bracket and line up the rear of the leaf, then install the new shackles to the frame.

And finally install to the leaf itself.

Then, install the new U-bolts using the original bracket and bump stops.
Step 6. Install Rear Shocks

This is the easiest part of the whole install.

Pop off the old shocks and slip the new rears into place, tighten the top to spec.

Use a stand to help press the shock into the lower shock mount on the rear axle, and bolt it up.
Step 7. Finishing Touches

Mounting The Spare
Most 33″ tires will fit in the stock spare location under the bed of the second gen Tundra without issue, go up to a 35″ however, and you have to do a few simple mods to make it fit, especially with aftermarket shackles.

We’ll be posting a follow up on how exactly to do this, but essentially you just need to trim the spare tire tabs that are attached to the frame and carefully cinch the tire up between the leaf shackles. It’ll be tight but it should clear by a hair, once your truck is on the ground the shackles will shift back and the clearance will expand by a couple inches.

Don’t forget to reattach that sway bar link once your truck is on the ground.

Eliminating Rubbing
Remove your front mud flaps, and trim the plastic wheel well liner on the front bumper. Tuck it just behind the mounting bolt that used to hold the front flap in place, like in the photo.

Eric expertly trimmed these pieces with a box cutter, negating any need for power tools, and making for a smooth cut.

This should take care of any rubbing that most 35s will cause as long as you’ve properly calculated your offset, and your truck is aligned correctly. If possible, get your alignment done before you trim for rubbing, because the alignment may change where exactly the tires rub, or may mitigate rub entirely.
Initial Impressions

I’m really happy with the way this project turned out. The lift looks great, and provides just enough height to clear my new 35×12.5R17 Arroyo Tamarock M/Ts at its 2.5 inch level. For both on and off road driving, in my opinion, it’s best to keep the vehicle’s center of gravity as close to stock as possible for the best performance, stability and fuel consumption. This lift accomplishes just that and at a great price point.
While I’ve only put a few hundred miles on the truck since the install, I feel I can confidently say that the ride quality has improved. Accounting for the fact that I went from an all terrain tire on a 20″ wheel, to a mud terrain on 17s, I believe that the ride on the Nitrocharger shocks is softer and smoother, without compromising steering performance or road feel.

Compared to the stock suspension, it actually feels like there is less body roll on the OME Nitrocharger setup, perhaps due to the slightly increased weight capacity of the new springs. The shocks, while on the budget side of aftermarket, are indeed performance shocks, and an upgrade from the stock shocks in terms of handling, ride and overall performance. I’m excited to see how they feel when I get the chance to take the truck off-road and put on several thousand more miles of daily driving. Stay tuned!
