
Strong, Discrete & Lockable – Protect & Organize Your Gear
Looking to make the most of your 2nd Gen’s interior space with discrete, lockable storage? ESP Truck Accessories has what you need!
The Under Seat Long Box Lockable Storage is ideal if you are looking for the maximum volume for equipment, recovery gear, towing accessories, long-guns (rifles), and other items in a secure format. If you have large or bulky items that you want or need in the cabin, this is an ideal solution. ESP also offers a split lid design to enable access essential if you have a child seat, or gear that precludes folding all three rear seats with flush mounted separate cam locks and matching keys. Because ESP redesigned the OEM seat rails (included) no spacers are required, which maintains a clean OEM look, function and seat location without raising height. This is what I’ll be covering in this post.
ESP also has two other different options…
The Under Seat Lockable 3 Compartment Storage offers similar storage to the long box, but in a three compartment format that reduces installation time, and offers the capability of providing separate areas for handgun and ammunition. Smaller items are also restrained from moving through the container, while providing ample storage for recovery, first-aid, tools, and other gear.
The Plastic Under Seat Storage provides an excellent lightweight option, at low cost, reduced installation time, and a unique ability to stow recovery, first aid, tools, and other gear. While it may appear that there isn’t a lid, the seat is cleverly used to cover the compartment to prevent gear from moving around the vehicle and increase storage.
Find It Online
- 2014-2021 CrewMax Under Seat Long Box Lockable Storage (USSCM-03): Check Price
- Seen in this post
- 2007-2021 Double Cab Under Seat Lockable Storage (USTNDDC-01): Check Price
- 2014-2021 CrewMax Under Seat Lockable 3 Compartment Storage ( USSCM-01): Check Price
- 2014-2021 Rear Under Seat Storage Plastic (USSCM-02): Check Price
Company Background

One of the few downsides of the Gen 2 and 2.5 Toyota Tundra interior, other than absurdly small cupholders is the lack of storage. Not only is there little to no storage for day-to-day items, but any valuable or expensive items or recovery gear is left in the open unsecured and available for theft.
To address this, Earl and his wife Shelly, founded ESP Truck Accessories. Their custom designed storage solutions for the Toyota Tundra and now various other makes and models maximize the interior space and security of your truck, along with supporting compliance with firearms requirements. Expertly made in USA storage solutions that fit perfectly under the back seat, which reduce visibility, increase security, and provides a massive amount of storage in a previously unused volume of high density foam from the factory.
They offer multiple options for the Gen 2 Tundra, and no surprise as Earl and Shelly have owned multiple Toyota Tundras across generations and proudly displayed one on their logo. Earl and his wife have been supporting the local community with suspension, tonneau covers, running boards, rock sliders, armor, lighting and audio, roof/bed racks, roof top tents, overland bed caps and probably just about anything else you need done to a Toyota – basically a one stop shop for truck accessories and modifications.
This is a Toyota family with decades of experience!
Company History

In 2014, Earl Pike was in stride after 23 successful years at Toyota as a technician, service advisor, and ultimately service manager. His Tundra journey began with one of the best exterior paint colors available, Blue Ribbon Metallic, and the same truck featured on his company logo today.
Unfortunately, while on the busy Los Angeles (LA) freeway, an unsecured ball hitch transitioned from backseat inanimate object to projectile as the Tundra transitioned from highway speed to zero in just a few short seconds. The result was a destroyed center console in a new pickup and an unhappy Mr. Pike. That was the moment that drove Earl to begin designing storage.
With a daughter in metal manufacturing locally in Norco, CA and his wife Shelly with over 35 years of aerospace experience as a manufacturing manager, the Pike family was ready. Earl and Shelly, like so many great SoCal off-road Toyota companies started in a humble garage with a great idea, can-do spirit, and a lot of risk. Earl began production of his storage solutions while working as a service manager at Toyota in 2015. He immediately sold out through Toyota grass-roots communication and after prolonged 60 hour work weeks Earl and his wife Shelly Pike formed ESP Truck Accessories.
Since then, ESP has expanded their product line to include aluminum storage with reduced complexity and the ability to separate ammunition from firearms, along with ABS plastic for lightweight and inexpensive storage, and all of it made locally right here in the USA.
Long Box Features & Specs

- Uses USA sourced 5052 aluminum for reliable strength-to-weight and exceptional corrosion resistance for environments exposed to moisture, saltwater, chemicals, and other outdoor elements. The lid and body are constructed with .125″ and .090″ thick 5052 aluminum respectively to ensure not only protection of contents, but strength and durability well beyond OEM. THIS IS TOUGH STUFF.
- All their products are locally manufactured and powder coated in Southern California (SoCal) with formidable two ton (2T) 10 gauge (ga) pressed steel latches (shown below) using flawless TIG welding. The 45.5″ (L) x 10″ (W) x 3.625″ (H) dimensions provide an immense 1,649 cubic (cu) inches (in) of volume.
- Ultimately, ESP brilliantly converts an unused space into a massive, secure solution to provide off-road, hunting, or weekend adventurer solutions to support daily, work, family, and other adventures. This is without peer and competition in storage. If you are looking for the finest solution available for your Gen 2 and 2.5 Tundra, this is THE answer.
Complete List – Parts, Materials & Tools Needed
Parts List
- Template (included)
- Rails (included)
- Under Seat Storage (included)
- Hardware (included)
Materials List
- ESKONKE 3 Pack Thread Lock Blue 243 (optional): Check Price
- Oscillating Saw Blades: Check Price
- Marking Crayon or Silver Permanent Marker: Check Price
Tools List
- 3/8 Ratchet
- 3/8 Metric 6-pt Socket (10mm, 14mm, 15mm ,17mm): Check Price
- 3/8 Universal Joint: Check Price
- 3/8 Torque Wrench: Check Price
- 3/8 Hex Socket (4mm hex): Check Price
- 3/8 Torque Wrench: Check Price
- Metric Thread Chase Set: Check Price
- Oscillating Multi-Tool: Check Price or Linoleum Hook Knife: Check Price
- Utility Knife: Check Price
Installation: Step-By-Step Guide

Step 1. Vehicle Preparation
- Use penetrating oil on hardware that is oxidized at least two hours prior. Be careful not get any excess on the carpet floor.
- Ensure the vehicle is in park.
- Ensure the parking brake is fully function and engaged (depressed).
- Move the front driver and passenger seats to the forward and as high up as possible for easier access.
- Remove the jack and associated tools from under the rear passenger seat.
Step 2. Disconnect Negative Battery Terminal

- Use a semi-deep socket or 10mm wrench and remove the negative battery terminal.
Step 3. Remove Template From Box

- Cut the cardboard template from the box and set aside for use in a later step using a utility knife with a new blade.
- Use the utility knife to cut an “X” in the positions indicated by the template. Bolts will be inserted in those locations in a later step.
Step 4. Remove Contents From Box

- All required hardware and material will be provided along with directions.
Step 5. Remove Rear Floor Mat

- Self explanatory, if needed.
Step 6. Driver Side Inner Seat Rail Bolt

- There are eight (8) total bolts for both rear seats, with one being larger.
- That bolt is located in the rear inner seat rail of the driver side rear seat as shown in the photo above.
Step 7. Remove Driver Side Seats

- Use a 3/8 ratchet and 17mm socket to remove seat bolts.
Step 8. Identify & Separate Larger Rear Driver Side Seat Bolt

- WARNING: Be sure to identify the bolt for later reinstallation as it does not fit any other location.
Step 9. Remove Seatbelt Receiver From Rear Driver Side Seat

- There is a small band of elastic material used to retain the seatbelt receiver.
- Pull down on the receiver and up on the elastic band to release the assembly.
Step 10. Remove Driver Side Rear Seats

- The driver side seat is heavier and harder to maneuver, therefore removing first is ideal, but not required.
- Because of the weight, a second person is a benefit to avoid damage to the vehicle or seat during removal and later reinstallation.
- Remove the driver side rear seat and set aside to avoid interference with work.
Step 11. Remove Passenger Side Rear Seat

- Use a 3/8 ratchet and socketto remove the seat bolts.
- Remove the passenger side rear seat and set aside to avoid interference with work.
Step 12. Install Under Seat Storage Template

- Use a seat bolt on each side (not the larger bolt) to secure the template as shown above to the seat bracket.
- Use masking tape as required to flatten and/or secure any deviations in the template.

- Before cutting be aware that on the rear seat passenger side the cut will be very close to the bracket and additional care needs to be used to avoid repair work.
Step 13. Mark & Cut Carpet Using Template

- Use a permanent marker or marking crayon to draw the outline for removal using the cardboard template.
- Use a utility knife with a new blade to cut the carpet along the line you have drawn.
- Remove the carpet for either reinstallation (optional) as a box liner, or disposal.
Step 14. Remove Rear Seat Foam

- Use an oscillating tool or linoleum hook knife with new blade to cut the three foam areas exposed by the removed carpet.
- CAUTION: The body metalwork is located under the foam; therefore, care should be taken to avoid paint and structural damage during cutting.
- CAUTION: If your vehicle has remote start the antenna is located in the center (CTR) and RH portion of the floorboard spacers and extra care must be taken to avoid damaging the antenna that runs parallel to the front edge where cutting occurs
Step 15. Remove Debris

- Use a shop vacuum (vac) or other method to remove debris created during removal of high-density foam in the previous step.
Step 16. Remove Rear Door Sill Plates

- Remove both rear door scuff plates (door sill plates).
- No tools are required.
- Simply use your fingers to gently pull up on the plate on the inner edge gently. The clips are located at both ends of the sill plate.
Step 17. Unhook Carpet Clips On Both Sides

- There are three carpet clips located under each door sill plate.
- Use your finger to lift the bottom and pull back and push up.
Step 18. Remove Rear Seat Carpet & Fold Forward

- Pull up on the carpet corners carefully and fold the carpet forward to full access to the rear floor.
Step 19. Remove Rear Floor Board Spacers & Inner Seat Leg Brackets

- Be careful not to damage the foam rear floor board spacer sections during removal as they will be reinstalled after minor trimming in a subsequent step.
- Use a 3/8 ratchet and 14mm socket to remove the five inner seat leg bracket sub-assembly LH and RH bolts.
- Remove the OEM inner seat leg bracket LH and RH sub-assembly as they will not be reinstalled or used.
Step 20. Install New ESP Seat Rails

- Use the provided hardware with the ESP kit to install the new seat rails.
- Ensure the seat rails are parallel to each other and the OEM with equal spacing.
- Use a 3/8 torque wrench, socket, apply blue thread-lock and tighten to 31 ft-lbs.
Step 21. Temporarily Reinstall Rear Floor Board Spacers

- You will need to trim the foam on each section to sit flush on the new ESP seat rails to accommodate the outer edge.
- Press on the foam to create an indentation that you will use in a later step to remove the excess to ensure the floor board spacers are flush.
Step 22. Remove Excess Material From Floor Board Spacers

- Carefully remove each floor board spacer section (LH, CTR, RH).
- Use the indentation in the previous step as a guide for cutting each of the three pieces. You may find it helpful to use a permanent marker to indicate the cut line.
- Remove excess with an oscillating multi-tool or linoleum hook knife to ensure all spacers fit properly with the new brackets.
- Dispose of excess material.
Step 23. Reinstall Floor Board Spacers

- Reinstall the foam floor board spacers (LR, CTR, RH) in their original position after verifying proper fit.
- Place the rear floor carpet back over the passenger area, but do not secure.
Step 24. Reinstall Rear Seat Inner Belt Assembly

- Ensure the rear seat inner seat belt assembly is pulled through the slot in center (CTR) rear passenger position of the rear floor carpet as shown above.
Step 25. Reinstall Rear Passenger Floor Carpet

- The key area are the corners on the outer edge in the center shown in the photo above.
- Ensure these are pushed into the corner to properly secure the carpet.
Step 26. Reattach Lh & Rh Carpet Clips On Both Sides

- Secure the carpet by reversing the method used to unhook the carpet clips on each side of the rear seat.
Step 27. Secure Rear Passenger Floor Carpet Underneath Back Mat

- Tuck extra carpet material into the corners of the rear and ensure any excess and all areas are under the rubber back mat.
Step 28. Reinstall Rear Door Sill Plates

- Install the rear sill plate on the left and right rear side.
- Sill plates are not position specific (LH or RH), but the rear portion is curved; therefore, ensure proper.
- Ensure proper orientation prior to snapping into the clip retention.
Step 29. Reinstall Jack & Tools

- Reinstall the jack and tools under the rear (RH) passenger seat location.
Step 30. Reinstall Rear (RH) Passenger Seat

- Reinstall the rear passenger RH seat and hand tighten with OEM hardware as you will need to be able to adjust the seat position to accommodate the long box installation in Step 32 below.
Step 31. Reinstall LH Passenger Seat

- Reinstall the rear passenger LH seat and hand tighten with OEM hardware as you will need to be able to adjust the seat position.
- CAUTION: Be sure to install the larger bolt with coarse threads in the rear position of the inner rail as shown above in Step 6.
Step 32. Mount New Under Seat Lockable Storage Long Box

- Place the storage into the rear of the truck parallel to the seats.
- Slide the rear right portion of the under seat long box lockable storage at an angle.

- The under seat storage is going to slide under the seat brackets into the location shown in the photo above.
- If the brackets are too tight, loosen the seat leg sub-assembly bolts.
Step 33. Secure Seat Bracket Hardware

- Once the under seat storage is in place secure the seat bracket bolts to 31 ft-lbs.
Step 34. Add Screws To Secure To Rails

- Use the included ESP 2 1/4-20 button head screws and washers to secure the under seat long box lockable storage to the provided rails using a 4mm hex.
- If the holes do not align, remove the box and adjust the ESP brackets and reinstall the box as described in the previous step.
Initial Review

I’ve had the pleasure of using the storage over the last few weeks and its been an absolute game changer.
On a recent trip to visit an off-road manufacturer I was able to stow camera gear, equipment, parts, tools, a laptop, chow, plus all my normal recovery and emergency equipment without visibility or awareness outside the vehicle of the contents. Best of all, high value items were secured inside my vehicle behind .125″ of USA made heavy duty 5052 aluminum and 2T pressed hinges. Thankfully all of that came without a significant weight increase, and unlike my normal approach of filling the bed with plastic containers, there wasn’t any annoying movement, noise, or risk of someone taking it out of the pickup. I’ve had lot of complements about the looks followed by a small level of shock as folks see the lid opened to reveal nearly four feet of unencumbered storage.
Even with all the junk I had managed to pack into the massive 1,649 cu-in of storage space there has been ZERO noise. I can’t validate if the interior is louder or quieter, but certainly I can’t (nor anyone else) detect any difference in cabin volume. What I can prove is an immediate and essential change in the vehicle function and form. The storage looks fantastic, breaks up the outline of the seat, and is an essential tool for hunting (and fishing) to ensure compliance with state and federal laws, and even day-to-day items that were previously just tossed in the back of the truck.
Final Thoughts

This is unquestionably in my view the finest under seat storage available for the Gen 2 and 2.5 Toyota Tundra and without peer and a real investment in your vehicle. Contact Earl and Shelly at ESP Truck Accessories. They’ve expanded an already brilliant Toyota line from famous Toyota trucks to include Chevrolet (Chevy), Ford, Dodge (Ram), I don’t think there is a better under seat storage option in existence. The Pike family pride in their products, production, and quality is apparent in every aspect of their business. The family ownership and operation ensures customers have a direct line to the great folks who come up with brilliants designs and improvements for an already amazing truck.
ESP Truck Accessories
12825 Temescal Canyon Rd, Unit E
Corona, CA 92883
(951) 858-3418
trucks@esptruck.com
https://www.esptruck.com/
