C4 Fabrication Hybrid Front Bumper For 3rd Gen Tundra – Review

Army Green 3rd Gen Tundra With C4 Fabrication Hybrid Front Bumper

Comprehensive Front-End Protection For Your Tundra On & Off The Trail

I’ve only ever owned trucks in my life, but none as reliable, rugged, and comfortable as the 3rd Gen Toyota Tundra. I knew when I bought this truck that I wanted to outfit it for the outdoors.

I own a shooting range, travel across the country for shooting competitions, and am an avid hunter, so I spend a lot of time off-grid and outdoors. I also recently bought a house in the middle of nowhere, where just in the last week I’ve had a bear, bucks, does, a raccoon, a rabbit, and a coyote stroll through my backyard/range. My two-lane road is known for animal crossings. The one modification I knew I needed to make to my Tundra was equipping it with a front bumper.

The only one I wanted was the C4 Fabrication Hybrid Series front bumper with the mid-height bull bar, and I have to say it’s the best upgrade I’ve made to my truck yet.

Find It Online

**Use code – TRAILCO – for 5% off**

Steel Front Bumper For Toyota Tundra

Quick Features & Specs

  • front skid plate (replaces plastic)
  • shell is made from 3/16″ laser cut P&O (picked and oiled) steel
  • 1/4″ winch and mounting plates
  • 3/4″ D-rings welded on both sides
  • .120 wall 1 3/4″ and 1 1.2″ diameter HREW tubes
  • 160 lbs. (plain), 168 lbs. (low bull bar), 174 lbs. (mid bull bar w/ gussets)
  • comes raw or factory powder coated
  • works with all factory sensors and camera systems
  • fits 40″ single row light bar
  • wings have room for several more lights
  • fits most winches 8-12k

Photos by Kenneth Miller IV and Nolan McDaniel.

Installation Video

C4 has a helpful video instruction guide if you choose to DIY the install.

Front Skid Plate Included

Hybrid Plate & Tube Front Bumper For 3rd Gen Tundra

The C4 Fabrication Tundra Hybrid Series Front Bumper comes with a front skid plate. It replaces the factory plastic skid plate. While I don’t do a ton of overlanding, I do encounter diverse terrain when off-roading across different properties to hunt or shoot. The skid plate has already helped me out in a field, where I couldn’t see tree stumps through the overgrown grass. I was spring turkey hunting in different states and was very grateful to the skid plate for doing its job.

Please ignore my missing TSS cover… We were still working on the bumper when these photos were taken. You reuse the factory cover here.

TSS, Park Sensor & Front Camera Compatibility

TSS, Front Camera & Parking Sensor Compatible Bumper For Tundra

One of the biggest issues to prepare for during the installation of the C4 Fabrication front bumper is the Toyota Safety Sense (TSS), park sensors, and front-mounted camera. All the bull bar options from C4 are compatible with TSS, and the low and mid-height bull bars will be visible in the front-mounted camera. I used Halls Service Center Tire Pros in Knoxville, TN, to install everything on my Tundra from the lift kit to the tires, wheels, and front bumper.

When I first got the truck back, C4 recommended going to a Toyota dealership to recalibrate the sensors. I spent a few hours at my local Toyota dealership, only to find they couldn’t realign the sensors. This throws off everything in your truck, where you can’t use cruise control, adaptive cruise control, or the pre-collision sensors. It displays an error code on your dashboard, and a message will pop up on your screen to take your truck to the nearest dealership. I took my truck back to the Halls’ garage, and after another day of trying, they realigned the sensors and got it working again. Just be prepared to be patient when installing the bumper on your truck and follow the directions closely.

I recommend you disconnect your battery while working on the install. Do not reconnect until you have absolutely everything reconnected and properly mounted.

Bull Bars & Powder Coating

C4 Hybrid Front Bumper With Mid-Height Bull Bar & Side Gussets

There are many options when you order a bumper from C4 Fabrication. At the time, they were only offering bumpers without any coating, so I had someone local powder-coat mine. Now, you can order it from them already powder-coated.

The first option for the bumper build-out is whether you want a bull bar; if so, the choices for the hybrid model include a low-height and a mid-height with tube gussets. I went with the mid-height to protect the front end of my truck as much as possible in case of collision, and more so against accidentally hitting an animal while driving than against another vehicle.

Lighting

C4 Hybrid Bumper On 3rd Gen Tundra With White Baja Designs 40" S8

The next option for your build is what add-ons you’d like to include. My main need for the front bumper was to add a light bar. Just about every major shooting competition I go to requires shooters to be on their first stage and ready to shoot by sunrise. I’ve rolled up to just about every range I’ve been to in pitch-black darkness, since most of these facilities have dirt roads and no lighting. And when it comes to hunting, a light bar is a necessity to get in and out of the woods well before sunrise and after sunset. Plus, I spend a lot of time thermal hunting, which means everything needs a light bar, from your truck to your off-road ATV.

All of that to say, I went full send on the light bar selection. I went with a Baja Designs S8 Straight LED 40-inch clear light bar. Baja makes some of the best lighting in the industry, with options to fit your needs, no matter what vehicle you plan to mount them on. The S8 bar features eight LEDs per 10-inch section. Lumens start at 6,324 for a 10-inch section, and when the 40-inch light bar turns on, it’s like turning on Clark Griswold’s Christmas lights.

Make sure you order a wire harness as well (C4 Fabrication offers that selection) and choose a good spot inside your truck for mounting the switch. I had mine installed just to the left of the steering wheel. When the light bar is on, the switch is bright red. While I didn’t select any fog lights, you can order the C4 Fabrication Bumper with Baja Designs Squadron fog lights. You can also order a second pair.

Recovery

12K Winch Compatible Bumper For Tundra

The next options when ordering the bumper are your choice of winch, fairlead, and winch shackle. I ordered a DV8 Xtract 12k Synthetic Rope Winch, which gave me peace of mind knowing the bumper would be fully compatible with the winch. What I liked most about this winch is that it comes with a wireless remote and a 12-foot wired remote, so there’s a backup in case anything goes wrong.

My sentiment is that if I’m using a winch, something has already gone wrong, so expecting something else to go wrong and planning for it is prudent. This winch includes an aluminum hawse fairlead, but you can also purchase other fairleads and shackles when ordering everything from C4.

The final option is whether you want to order a C4 Hawse License Plate Mount, which you can also order separately later on.

Initial Impressions

Hybrid Steel Front Bumper For 3rd Gen Tundra

My first impressions of the C4 Fabrication front bumper are nothing but positive. First, the bumper changes the truck’s entire look. If a truck owner says they don’t care about how their vehicle looks, they’re lying. They absolutely care. C4 Fabrication makes an aesthetically pleasing bumper, and the powder coat turned out smooth and sleek.

Overall, the weight of my Tundra feels very different now that I’ve put almost a thousand miles on it with the new bumper. I like how the Tundra handles and drives when it’s loaded down. The mid-height bull bar with gussets weighs 174 pounds, so make sure your truck’s suspension can handle the additional front weight. I’m running the new Ironman IM 2.5 suspension, with considerations for the added weight.

The Baja light bar has been used almost every week. I had one scare driving home from the airport at 3 am last month. I had the light bar on and, thankfully, was able to come to a complete stop in front of a deer. The light bar gave me so much more notice than if I had had it off. I’ve also been able to spotlight a few animals on my land when pulling into my yard, so that’s been a fun part of having a 40-inch light bar.

Final Thoughts

Green 3G Tundra With Bronze Wheels & C4 Hybrid Bumper

I’ve never been happier with an aftermarket install than I am with the C4 Fabrication Hybrid Front Bumper. Halls Service Center Tire Pros did a great job cutting the front of my truck and my fender flares to fit the front bumper seamlessly. I am beyond impressed by how rugged and durable every cut, weld, and piece of hardware on the C4 Fabrication bumper is.

I would recommend this bumper to anyone looking for a solid bumper that can handle any off-roading or overlanding scenario you throw at it. I’m looking forward to more adventures with this bumper, so stay tuned for updates along the way!

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted
0
Questions or Comments?x
()
x