
Building The Ultimate Bed Tool & Equipment Storage System For Your Truck
The good folks at Rago Fabrication are pretty humble, and if you’re not careful, it’s easy to overlook the value of organizing your Tundra for off-road adventures. Rago’s Bed Rail Modular Accessory Mounts for the Tundra are longer than the Tacoma to accommodate the larger truck bed. Both let you attach a variety of items, with the most common probably being the Quick Fist Mount + Clamps sold by Rago as well.
The mounts themselves provide great flexibility and provide secure storage for shovels, recovery boards, fire extinguishers, air tanks, axes, hatchets, fuel cans (like RotopaX), farm (Hi-Lift) jacks, and well just about anything you can think of attaching using the bolt pattern and included Grade 8 hardware along with compatible Rago accessories listed on their website.
Just be aware of the rail’s weight limit as you add all that awesomeness to your truck bedsides. Another great feature is the ability to use the OEM deck rail, which avoids drilling and lets you easily install and reposition the Bed Rail Modular Accessory Mounts as needed.
These work for both the 2nd & 3rd Gen Tundra.
Find It Online
- Rago Fabrication Toyota Tundra Bed Rail Accessory Mounts: Check Price
Use code – TRAILCO – to save 10%!
Why You Need Them

These robust laser cut CNC bent steel mounts allow use of Rago’s Quick Fist mounts, which raise the height 21mm and a major advantage over the direct single-bolt mounting strength. This extra height helps prevent gear interference, maximizes storage, and eliminates annoying noise and rattles caused by tools vibrating against the cover, roof racks, truck beds, and other tools.
Ultimately, the Bed Rail Modular Accessory Mounts let you create a clean, organized, secure truck bed, preventing heavy items from sliding around off-road or in traffic. The mounts are finished in an uber-durable black 2-stage hammer powder coat that’s textured and provides a long-lasting, quality appearance.
Unboxing

There’s value in showing how well Rago ensures all the products you order arrive in great condition. Each item is wrapped in foam with plastic wrap to ensure the finish and items were protected during shipping – even the T-slot nuts were sleeved! It’s a small thing, but it’s confidence-inspiring to know the good folks packing your items put that much effort into what you’ve spent your hard-earned cash on.
Product Overview

The mounts are compatible and fully integrated with a range of accessories, including, but not limited to…
- Bed Rail Accessory Mount Extensions
- Quick Fist Mounts & Clamps
- Bed Rail Recovery Board Mounts
- Mounts For Hi-Lift Jack
- Modular Accessory Mounts
What’s Included?
- x2 Mounts
- x2 Brackets
- x4 Bed Rail T-Slot Nuts
- Grade 8 Stainless Steel SAE/Imperial Hardware
- Candy!
Installation

Tools Required
- 1/4 in Drive Ratchet
- 1/4 in Drive Extension
- 5/32 Hex Bit
- 3/16 Hex Bit
- 7/8 6 Point SAE/Imperial Socket
- 7/16 SAE/Imperial Combination Wrench
- Blue ThreadLock
Step 1. Inventory Hardware

It’s a good idea to make sure you have all required items before installation. Thankfully, Rago Fabrication has never disappointed, and the only hardware that has gone missing are the ones I dropped over the side of the truck.
Step 2. Layout & Installation Planning

I recommend planning your layout before purchase, and especially before installation. The author didn’t, which meant a lot of rework and shifting. No real impact with Rago or other aftermarket T-slot nuts, but a headache with OEM Deck/Bed Rail Adjustable Tie-Down Cleats.
Because the OEM cleats aren’t compatible with, well… anything, you’ll want to replace them with something like the Cali Raised Bed Rail Hook (recommended), or you may have to loosen or remove the deck rail to slide the OEM Deck Rail Adjustable Tie-Down Cleats if installed. Regardless, you’ll likely want to change or add items, which is why I recommend (highly) departing from OEM cleats while you are doing your modification, as it’s the easiest and fastest time to do so.

Step 3. Remove The OEM Deck Rail End Cap(s)

Push the tab of the OEM deck rail end cap as shown by the arrow, then slide it towards the rear of the truck to remove it. Set aside and retain for reinstallation. For some reason, these are easy to lose, and the OEM ones are silly expensive considering the material, so you don’t want to lose them… (the author lost them).
Step 4. Loosen/Remove OEM Deck Rail (If Required)

If you have a BakFlip or similar cover that has modified the deck rail location (lower), you may need to loosen the rail to remove the cleat. If required, loosen the OEM Deck Rail bolts using a short 1/4 extension and a 7/8 socket (shallow), then remove the Adjustable Tie-Down Cleats (if required) by turning the wheel counterclockwise and depressing it, then slide to remove.
Step 5. Insert Rago T-Slot Nuts

Your configuration and positioning may be different. For this use case, I wanted the Rago Fabrication Hi-Lift Jack Mounts on the passenger side, which meant most items had to go on the driver side because of the CrewMax’s short bed length. The Tundra has a pretty deep bed (almost to a fault), and you’ll find plenty of vertical room.
It is worth mentioning that the Rago mount may not fit over the wheel well if you have certain bed covers, as they drop the deck rail as shown above, and you may want to order a set of the Tacoma Accessory Mount Variant as a result if you need to attach items in that location.

Before you install the Bed Rail Mount Bracket, space the T-slot nuts as closely as possible, since the room to work in the rail itself is pretty limited. I ended up using some flexible material to push the T-slot nuts into position as needed, and it didn’t take much force.
Step 6. Install The Accessory Mount Bracket

Use a 1/4 in ratchet and 4mm or 5/32 hex bit along with a 7/16 combination wrench to mount the bracket to the Factory Bed Rail Modular Accessory Mount with the smaller washers and button head bolts included. Don’t fully tighten the hardware, as you’ll want to make adjustments once mounted based on the distance from the side of the bed to the mount.

Reverse side (bottom) for detail and a quick note. The mounts don’t come with washers for the reverse side, and as long as you’re not rotating that hardware, you shouldn’t damage or compromise the 2-part hammer powder coat. I ended up buying some extra hardware after the first install and used washers on both sides. Not required, but a small item to keep the finish as nice as possible.
CAUTION: Do not apply thread locker to the bolt in this step, as it will compromise the nyloc fastener (nut) and result in failure and potential damage to the vehicle and/or occupants in the bed area.

If you purchased the Bed Rail Accessory Mount Extension, you will not need to install the Factory Bed Rail Modular Accessory Mount Bracket. If you want both brackets longer, you would need to purchase cap head bolts, which probably won’t be required.
The top of the mount extension has a five (5) hole bolt pattern that matches the accessory mount base. The base bracket for extension is tapered and slotted, as shown in the photo. Adjust the extension bracket in the same manner as shown above in Step 6.
Step 7. Install Mount On Bed Rail

Apply blue thread locker to the cap head bolt threads. Use a 1/4 in drive ratchet and the 5/32 hex bit above or Allen L-key as shown below to install the bolt and tighten the T-slot nut installed in the previous step to secure the mount to the deck rail.
Step 8. Adjust & Tighten Bracket

Different areas of the bed will be at varying distances from the accessory mount. The good folks at Rago took this into account and have adjustment built into the bracket. Once the bracket is properly adjusted to be flush with the bed side, fully tighten the fasteners using a 1/4 in drive ratchet and 7/16 wrench or another ratchet and 7/16 socket.
For extra care and protection, clean the area where the bracket contacts the bed with 91% isopropyl alcohol and install a small piece of rubber weatherstrip. This provides vibration and noise dampening, which is especially useful during heavy off-road use.
Note: If you purchased the Mount Extensions, tighten them the same way.
Step 9. Repeat Steps 4-8 On Remaining Mounts

Depending on how many Bed Rail Modular Accessory Mount Brackets you purchased or plan to install, repeat Steps 4 through 8 as needed.
Step 10. Tighten/Reinstall OEM Deck Rail (If Required)
Reinstall the OEM Adjustable Tie-Down Cleats (if removed and retention desired) in the reverse manner of removal. If you loosened or removed the OEM Deck Rail bolts in Step 4 above, use a short 1/4 extension and 7/8 socket (shallow) to tighten bolts.
Step 11. Reinstall OEM Deck Rail End Cap(s)
Push the OEM deck rail end cap as shown by the arrow and slide it back into the tab slots. Verify the deck rail end cap is secure before moving on to avoid loss.
Final Thoughts

The Rago mounts and associated extensions are probably one of the most flexible bed storage solutions available. My only small complaint is the use of SAE/imperial hardware. It would be more convenient and avoid the hassle of carrying extra tools if it used metric. Unfortunately, it seems like all aftermarket modifications are in SAE/imperial, so I may just need to get on board and stop complaining.

I prefer the accessory mount vs. MOLLE, which permanently alter the bed and can be slightly more time-consuming to remove if I need to haul cargo like gravel, sand, dirt, etc. I’ve also used two accessory mounts together to hold 5-gallon fuel jugs as shown in the photo below and other happy accidents.

Ultimately, it’s really up to your imagination, the Rago catalog, and time. I’m confident that you’ll find the increase in bed space well worth the small price of admission, and the quality is clearly ready to stand up to years of use and abuse. Highly recommended!

